Have you gone shopping for a cake stand or dessert platter recently? Well, I did since lil miss was turning one…and I HAD TO HAVE A PARTY 🙂 because that is just how I roll. I scoped out Target, Walmart, and Amazon. You know what…not one had a dessert platter or cake stand for less than $15.00…and you can bet it sure did not match my décor scheme. Oh and with that price, I couldn’t buy multiples either, which I would surely need for my dessert table plans I had in mind 🙂 That means I had some seriously big dessert plans!
This is where I took matters into my own hands. I came up with a way to make 5, yes 5, platters for a little more than 3 dollars each. And this was with buying cans of spray paint, which will last for many more projects to come. If I already had the paint at home, or if I actually calculated the price to make the platters based on the amount of paint I used from the can, the price to make each platter would be even lower! Oh yeah, and even better, these platters matched my décor and color scheme perfect..
Where to Buy the Most Economically Priced Materials to Build Dessert Platters and Cake Stands
The first thing you will need to do to whip these little guys up, is take a trip to the dollar store. I purchased candle holders, and platters. Another good place to find large, good quality platters is Michael’s or A.C.Moore, especially after holidays. I scored some platters from their Christmas clearance. They were a buck each, and really ugly, but I didn’t care because I knew I was going to paint them anyways!
I then took my endeavors over to Walmart. It is the cheapest place I have found to purchase spray paint. You can customize these platters in a variety of ways, just by the paint you choose.I got the colors I wanted, which happened to be bright spring colors. Rustoleum has some awesome finishes, like metallic if you are after a faux metal look, or the looking glass finish, which provides a mirrored surface! Both super cool. See, the possibilities for your platters really are endless!
Step-by-step Guide to Creating Designer Cake and Dessert Platters in Less Than 15 Minutes
Now that we have our supplies, the most important step is to prepare the items for painting. I used rubbing alcohol and wiped down each platter and candle holder. They need to be very clean so the paint will adhere and there are no little texture bumps. Items from the dollar store can be dusty some times, so this step really is critical to obtaining a beautiful finished product.
Next, I go down into the scary cave below my house, OK, actually its our basement! I have set up a board as my painting station. It is not anything glamorous, as you will see in the pictures, but it does the job. Not to mention, it is going to get covered in paint. 🙂 Make sure your work area is clean and free of any dust particles, dirt etc. Also make sure you lay a painters tarp on the floor under your work surface. Let’s just say, I may have forgotten to do this in the past one or two times, and the mister was not very happy about my over spray….
Place the items to be painted on your work surface. I started by spraying the candle stick. Apply an even coat of paint. More the spray can in a wisping motion. You do not want to make thick layers of paint. That gives the potential for drips. It is much better to do multiple thin coats. I walk around the candle holder as I paint it to make sure I have painted all the crevices. You only need to paint the exterior of the holder.
Once the first coat of paint on the candle holder is complete, spray the platter, either the same color or an accent color. Whatever is your preference. Again, use the same wisping motion for the paint application Thick coats of paint are not your friend! I am talking from experience here people!
Now, go back and do another coat on the candle holder. Repeat, going back and forth between the two pieces until a total of three light coats of paint have been applied. Do a final once over and make sure the items have even coverage. If there are any thin spots add a little more paint.
Let the items dry, at least over night. You could go back and paint the bottom side of the platter now if you want. No one was going to see my bottom side, so I did not bother to do that.
Once everything is dry, put hot glue on the top of the candle holder and place the painted platter on top of the candle holder. Make sure the platter is centered. Firmly press the platter onto the candle holder and continue to hold for about two minutes.
Set your platter aside and let the glue cool completely. I recommend not to use your platter for at least another hour, however, it is now fully assembled and ready for use.
Display and Usage Tips for Your New Cake Stands and Dessert Platters
I have a few platter tips that I want to share with you since you are making these bad boys to help up your platter game even more!
-Use a doily to dress up the platter and make it look a little more fancy
– A doily is also great if you have concerns about the food directly touching the painted surface ( I recommend serving
things that are already in wrappers on these platters, such as cupcakes, mini pastries, cakes, etc)
-To create the illusion of various height platters, place Styrofoam blocks under some of the platters. I was able to do this
and hide the Styrofoam in my decor so no one even noticed I had given them a little lift.
-For a different look, glue 2 completed platters together to obtain a multi-tier platter. These look great with mini cupcakes!
And there you have it. An easy 15 minute project that is easy on the wallet and creates designer looking cake stands and serving platters! The best part about this tutorial is I love how customizable these platters are, making them so versatile for all types of decor.
Oh, P.S. If you need to make those unicorn and cloud cookies (and don’t we all :)), the tutorial is here! And, the unicorn cupcake tutorial will be coming shortly, so stay tuned!